Beta 450 Manuale Utente Scaricare il pdf (Pagina 14)

Assembly Procedure 1450 Tower - 3T

Attach two diagonal braces from lower frame

to upper frame in accordance with bracing

pattern.

Attach one more diagonal brace from 1st

rung to 3rd rung of upper frame.

14.

15.

Repeat step 11 and climb through the

trap.

Fit horizontal braces to both sides of

platform at 1st and 2nd rungs above

platform level to form permanent handrail.

It is safe to use the platform once horizontal

braces are locked and secured in place.

17.

18.

Repeat steps 13 to 18 until desired height has been reached (max. height

8m outdoors and 12 m indoors).

Place xed platform initially at 4m level

(diagonally) and slide across to opposite

side of tower (as shown) from where

operative is standing below then place

trapdoor platform ensuring that trap is

placed at same side to trap on platform

below.

Note Ensure that the trapdoor hinge is to

the outside edge.

16.

DISMANTLING THE TOWER

The following instructions describe the steps necessary to dismantle the BETA

tower utilising the 3T method.

For your safety and that of others, take particular care not to allow

components to fall to the ground since this will not only result in damage

but may cause serious injury.

At top platform level unlock horizontal

braces at furthest positions from the trap

before descending through the trap.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Nessun commento

Beta 450 Manuale Utente Pagina 14